[FileVersion]
Version = 2


;=================================================================================
;=================================================================================
;=================================================================================
[MenuTrans]

MenuFile = 文件
MenuItemSave = 保存
MenuItemSaveAs = 另存为
MenuItemExit = 退出

MenuDebug = 选项
MenuItemReadEEPROM = 读取EEPROM
MenuItemDebugDeveloper = 开发人员
MenuItemProControl = 烧录软件烧录控制选项
MenuItemReadChipConfigWord = 读配置字
MenuItemForceProgramCtrl = 强烧控制
MenuItemUpdate = 烧录器更新
MenuItemReadChipConfigWord = 读取芯片配置字
MenuItemProgramCtrl = 烧录器烧录控制选项

MenuTool = 工具
MenuItemDownloadCCS = 批量下载CCS文件
HS2303PVerSet = HS2303-P系列版本设置
MenuItemReadCheckSum = 读取芯片CheckSum...
MenuItemSeparator1 = -
MenuItemSimpleChinese = 简体中文
MenuItemEnglish = 英文


MenuHelp = 帮助
MenuItemAbout = 关于
MenuItemHIDTest = HID 测试
MenuItemWriterManual = 烧录器使用手册
MenuItemCreateEncyptTable = 生成加密表数据


;=================================================================================
;=================================================================================
;=================================================================================
[ToolBarTrans]
ToolButtonSave = 保存
ToolButtonSeperator1 = -
ToolButtonPrintScreen = 截屏
ToolButtonSeperator2 = -
ToolBtnClosePort = 关闭串口
ToolBtnFindCom = 查找串口
ToolButtonOpenDir = ccs文件夹
ToolButtonClearMsg = 清除
ToolButtonCheckSum = 校验和
ToolButtonUpdateFW = 固件更新
ToolButtonAbout = 关于
ToolButtonHelp = 帮助


;=================================================================================
;=================================================================================
;=================================================================================
[ComponentTrans]
;----------------------------------------------
;main dialog
;----------------------------------------------
MainForm_GroupBoxOperation = 操作
MainForm_GroupBoxData = 下载数据
MainForm_GroupBoxInfo = 信息
MainForm_BtnChipSel = 芯片选择
MainForm_BtnOpenFile = 打开文件
MainForm_BtnRollCode = 滚码设置
MainForm_BtnTestSetup = 测试选项
MainForm_BitBtnProgramOption = 烧录选项
MainForm_BtnDownLoad = 下载
MainForm_BtnProgram = 烧录
MainForm_BtnReadChip = 读芯片


;----------------------------------------------
;HS1306 config dialog
;----------------------------------------------
FormHS1306Config_GroupBox_ChipName = HS1306
FormHS1306Config_Label_LVD32 = 低压检测(3.2V)：
FormHS1306Config_Label_LVD24 = 低压检测(2.4V)：
FormHS1306Config_Label_Reset = 复位(2.4V)：
FormHS1306Config_Label_OSC = OSC：
FormHS1306Config_Label_WatchDog = 看门狗：
FormHS1306Config_Label_Encypt = 加密：
FormHS1306Config_Label_IRC = IRC频率：

;----------------------------------------------
;hs2300-P config dialog
;----------------------------------------------
FormHS2300Config_GroupBox_ChipName = HS2300-P
FormHS2300Config_Label_Encpyt = 加密：
FormHS2300Config_Label_ResetPin = 复位引脚：
FormHS2300Config_Label_WatchDog = 看门狗：
FormHS2300Config_Label_OSC = OSC Pin：
FormHS2300Config_Label_Div = 分频数选择：
FormHS2300Config_Label_FreqMode = 振荡频率模式：
FormHS2300Config_Label_ResetTime = 复位时间：
FormHS2300Config_Label_FreqIRC = 内置RC频率：
FormHS2300Config_Label_LVD = 低压检测：
FormHS2300Config_Label_PW = 电源模式：
FormHS2300Config_Label_ReadPort = 读端口：
FormHS2300Config_Label_Schmitt = 施密特：
FormHS2300Config_Label_PB3 = PB3：
FormHS2300Config_Label_Cycle = 指令周期：

;---------------------------------------------- 
;hs2300-PD config dialog
;----------------------------------------------
FormHS2300PDConfig_GroupBox_ChipName = HS2300-PD
FormHS2300PDConfig_Label_Encpyt = 加密:
FormHS2300PDConfig_Label_ResetPin = 复位引脚：
FormHS2300PDConfig_Label_WatchDog = 看门狗：
FormHS2300PDConfig_Label_OSC = OSC Pin：
FormHS2300PDConfig_Label_Div = 分频数选择：
FormHS2300PDConfig_Label_FreqMode = 振荡频率模式：
FormHS2300PDConfig_Label_ResetTime = 复位时间：
FormHS2300PDConfig_Label_FreqIRC = 内置RC频率：
FormHS2300PDConfig_Label_LVD = 低压检测：
FormHS2300PDConfig_Label_PW = 电源模式：
FormHS2300PDConfig_Label_ReadPort = 读端口：
FormHS2300PDConfig_Label_Schmitt = 施密特：
FormHS2300PDConfig_Label_ConBit = 配置位：

;----------------------------------------------
;HS23P36E config dialog
;----------------------------------------------
FormHS23P36EConfig_GroupBox_ChipName = HS23P36E
FormHS23P36EConfig_Label_Noise = 噪声抑制：
FormHS23P36EConfig_Label_Encypt = 加密：
FormHS23P36EConfig_Label_FreqDiv = 时钟分频：
FormHS23P36EConfig_Label_ResetTime = 复位时间：
FormHS23P36EConfig_Label_WatchDog = 看门狗：
FormHS23P36EConfig_Label_WatchLVD = LVD:
FormHS23P36EConfig_Label_LowPw = 低功耗：
FormHS23P36EConfig_Label_ReadDuty = 读占空比：


;----------------------------------------------
;hs2300-p test dialog
;----------------------------------------------
FormHS2300Test_GroupBox_FreqVoltage = 频率测试电压点
FormHS2300Test_GroupBox_FreqRange = 频率测试范围
FormHS2300Test_CheckBoxTestI = 测试静态电流
FormHS2300Test_CheckBoxV20 = 2.0V
FormHS2300Test_CheckBoxV30 = 3.0V
FormHS2300Test_CheckBoxV36 = 3.6V
FormHS2300Test_ButtonOK = 确定


;----------------------------------------------
;hs23x3 config dialog
;----------------------------------------------
FormHS23x3Config_GroupBox_ChipName = HS2303
FormHS23x3Config_Label_Driver = 内置驱动电流选择：
FormHS23x3Config_Label_WatchDog = 看门狗：
FormHS23x3Config_Label_Encypt = 加密：
FormHS23x3Config_Label_IE = IE:

;----------------------------------------------
;HS26P00 config dialog
;----------------------------------------------
FormHS26P00Config_GroupBox_ChipName = HS26P00
FormHS26P00Config_Label_P04OpenDrain = P04开漏输出：
FormHS26P00Config_Label_LVD = LVD：
FormHS26P00Config_P11 = P11配置：
FormHS26P00Config_WDT = 看门狗：
FormHS26P00Config_Fosc = Fosc：
FormHS26P00Config_Fcpu = Fcpu：
FormHS26P00Config_Encypt = 加密：
FormHS26P00Config_Noise = 噪声抑制：
FormHS26P00Config_P2 = P2配置：
FormHS26P00Config_InstCycle = 指令周期：
FormHS26P00Config_LowPW = 低功耗：
FormHS26P00Config_AD_CTRL = AD_CTRL:
FormHS26P00Config_AD_ADJ = AD_ADJ:
FormHS26P00Config_AD_TEST = AD测试：


;----------------------------------------------
;sel chip dialog
;----------------------------------------------
FormSelChip_GroupBox_ChipTyps = 芯片型号
FormSelChip_GroupBox_PinMap = 烧录引脚
FormSelChip_BtnOK = 确定
FormSelChip_BtnCancel = 取消


;----------------------------------------------
;rolling Code setup dialog
;----------------------------------------------
FormRollingCodeSetup_GroupBox_RollAddr = 滚动地址(十六进制)
FormRollingCodeSetup_Label_AddrCount = 地址数目：
FormRollingCodeSetup_Label_StartAddr = Rom起始地址(十六进制)：
FormRollingCodeSetup_Label_StartVal = 起始值(十六进制)：
FormRollingCodeSetup_Label_StopVal = 结束值(十六进制)：
FormRollingCodeSetup_Label_Step = 步进值(十进制)：
FormRollingCodeSetup_RadioGroup_Mode = 地址递增方式
FormRollingCodeSetup_RadioButtonUp = 递增
FormRollingCodeSetup_RadioButtonDown = 递减
FormRollingCodeSetup_RadioButtonNone = 不变
FormRollingCodeSetup_CheckBoxEnable = 打开
FormRollingCodeSetup_BtnOK = 确定

;----------------------------------------------
;download Prompt dialog
;----------------------------------------------
FormDownLoadPrompt_LabelInfo = 文件没有保存，是否保存？
FormDownLoadPrompt_BtnYes = 保存，之后下载
FormDownLoadPrompt_BtnNo = 不保存，直接下载
FormDownLoadPrompt_BtnCancel = 取消

;----------------------------------------------
;save file Prompt dialog
;----------------------------------------------
FormSaveFilePrompt_LabelInfo = 文件没有保存，是否保存？
FormSaveFilePrompt_BtnYes = 保存，之后打开新的文件
FormSaveFilePrompt_BtnNO = 不保存，直接打开新文件

;about dialog
FormAbout_GroupBox_Version = 当前版本
FormAbout_Label_ProductName = 
FormAbout_Button_OKButton = 确认


;----------------------------------------------
;hs2245 config dialog
;----------------------------------------------
FormHS2245Config_Label_LedPin = LED PIN：
FormHS2245Config_Label_VotRaise = 升压：
FormHS2245Config_Label_Fcpu = Fcpu：
FormHS2245Config_Label_WDT = WatchDog：
FormHS2245Config_Label_Encypt = 加密：



;----------------------------------------------
;HS2250PT config dialog
;----------------------------------------------
FormHS2250PTConfig_Label_LedPin = LED PIN：
FormHS2250PTConfig_Label_VotRaise = 升压：
FormHS2250PTConfig_Label_Fcpu = Fcpu：
FormHS2250PTConfig_Label_WDT = WatchDog：
FormHS2250PTConfig_Label_Encypt = 加密：
FormHS2250PTConfig_CheckBox_ReWrite = 重烧
FormHS2250PTConfig_Label_Temp = 温度修调值：
FormHS2250PTConfig_Label_RF = 频率：
FormHS2250PTConfig_GroupBox_Other = 其他

;-----------------------------------------------
;HS23P1800 config dialog 
;-----------------------------------------------
FormHS23P1800Config_Label_Timer1_Int_Enable = Timer1使能：
FormHS23P1800Config_GroupBox2 = 
FormHS23P1800Config_Label_Wakeup = 唤醒始终有效：


;-----------------------------------------------
;HS23P6516 Serials config dialog 
;-----------------------------------------------
FormHS23P36EConfig_Label_XTSelect = XT选择：

;-----------------------------------------------
;FormProgramOption config dialog 
;-----------------------------------------------
FoormProgramOption_GroupBoxOption = 选项
FormProgramOption_CheckBoxBlank = 查空
FormProgramOption_CheckBoxIRC = IRC校准
FormProgramOption_CheckBoxProgramConfig = Config烧录
FormProgramOption_CheckBoxProgramROM = ROM烧录
FormProgramOption_CheckBoxConfigVerrify = Config校验
FormProgramOption_CheckBoxROMVerify = ROM校验
FormProgramOption_BitBtnOK = 确定
FormProgramOption_BitBtnCancel = 取消

;=================================================================================
;=================================================================================
;=================================================================================
[Strings]
File not saved,save? = 文件未保存，是否保存？
Prompt = 提示
File Saved = 文件已保存
File not saved = 文件未保存
File saved failed = 文件保存失败
File not saved,download canceled = 文件未保存，取消下载
Download canceled = 取消下载
Initializing...... = 正在初始化......
Serial port initialized failed = 串口初始化失败
Error = 错误
DownLoading...... = 正在下载......
Device connected failed = 下位机连接失败
Sorry!The function not implemented = 功能暂时未实现
Reading...... = 正在读取......
Serial port closed = 串口已关闭
Picture saved = 图片已保存
Picture not saved  = 图片未保存
File not found: = 文件没有找到：
File open failed: = 文件打开失败：
File path error: = 文件路径错误：
File save failed: = 文件保存失败：
File save as failed: = 文件另存为失败：
unknow file format = 未知文件格式
File create failed = 文件创建失败
File read error:=读文件出错：
File write error:=写文件出错：
File create error!=文件创建错误！
This chip has no rolling infomation! = 该芯片无滚动码信息!
This chip has no testing infomation! = 该芯片无测试信息!
This chip can not be downloaded!=该芯片无法下载!
This chip can not be read!=该芯片无法读取！
Select chip form caption = 芯片选择
Rolling form caption = 滚动码设置
Download prompt form caption=下载提示
Test form caption = 测试选项
The device not match = 烧录器的型号与您选择的芯片型号不匹配
Check sum not match,download again please! = 上位机与下位机校验和不一致，请重新下载
Device check sum: = 下位机校验和 ：
Software check sum:=上位机校验和 ：
Download success! = 下载成功！
Download failed! = 下载失败！
Reading device beginning......=开始读取烧录器......
Read device success! = 读取成功！
Read device failed!=读取失败！
Read chip beginning......=开始读取芯片......
Read chip success!=读取芯片成功！
Read chip failed!=读取芯片失败！
Chip name:=芯片名称：
The chip can not be programmed!=该芯片无法编程！
Read chip ID failed!=读取芯片ID失败！
Rolling code setup=--------------------[滚动码设置]--------------------------
Rolling AddrCount:=滚码地址数目：
Rolling state:Enable=开启状态：开启
Rolling state:Disable=开启状态：关闭
Rolling mode:Up=递增方式：递增
Rolling mode:Down=递增方式：递减
Rolling mode:Normal=递增方式：不变
Rolling mode:Unknow=递增方式：未知
Step(DEC):=步进(十进制)：
Rom start address(HEX):=起始ROM地址(十六进制)：
Rolling start value(HEX):=滚动码起始值(十六进制)：
Rolling stop value(HEX):=滚动码结束值(十六进制)：
Reading config word......=正在读取配置字......
Read config success!=读取配置字成功!
Disconnect with device,check the device as bellow:=与下位机连接中断，请检查以下项目：
1.Comfirm the COM port number your selected was right.=1.请确认串口选择正确。
2.Comfirm the chip your selected and the device type are matched.=2.选择的芯片和烧录器型号对应一致。
3.Comfirm the switching behind of device switch to USB side.=3.烧录器后面的下载开关拨到USB一边。
4.The function maybe not implemented.=4.下位机可能没有实现该功能。
Unknow SN8 file format!=未知SN8文件格式!
Check old version:=老版校验和：
String format error=字符串格式错误
The sector can not be empty!=读写扇区不能为空!
The start value your input great than the stop value your input.=您输入的起始值大于结束值
The start value your input less than the stop value your input.=您输入的起始值小于结束值
Software name:=软件名称：
Software version:=软件版本：
Company name:=公司名称：
Copy right:=版权所有：
Description:=描述：
HS23P36E file has invalid inst!= HS23P36E 文件中包含无效指令!
The SN8 file code more than HS26P00 = SN8 文件中的有效代码空间大于HS26P00的代码空间，请选择HS26P10烧录该程序！
HS23P6516 Serials Ext Crystal= 外置32.768K振荡器
Program option not set = 烧录选项没有选择
The code length is above ROM size,please select other chip! = 程序长度超过最大芯片ROM容量，请选择正确的芯片烧录
Stack overflow = 堆栈超出，请更新程序！
Download failed,recheck project please! = 无法下载，请检查项目是否存在异常！






Translator.LoadString('Description:')